Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

ED3N

Thread Starter
Joined
Jul 19, 2019
Messages
2
My ram keeps crashing the whole pc like this , I've never seen anything like this in my life it also does a sound like a sewing machine when this crash occuIMG_20190719_140438.jpg IMG_20190719_140445.jpg IMG_20190719_140438.jpg IMG_20190719_140445.jpg IMG_20190719_140438.jpg IMG_20190719_140438.jpg rs.IMG_20190719_140438.jpg IMG_20190719_140445.jpg and I can't find any solution for it online , any suggestions ?
 

ED3N

Thread Starter
Joined
Jul 19, 2019
Messages
2
Tech Support Guy System Info Utility version 1.0.0.4
OS Version: Microsoft Windows 10 Pro, 32 bit
Processor: Pentium(R) Dual-Core CPU E5700 @ 3.00GHz, x64 Family 6 Model 23 Stepping 10
Processor Count: 2
RAM: 3292 Mb
Graphics Card: Intel(R) G41 Express Chipset (Microsoft Corporation - WDDM 1.1), 1422 Mb
Hard Drives: C: 91 GB (36 GB Free); D: 226 GB (178 GB Free); E: 146 GB (103 GB Free);
Motherboard: Gigabyte Technology Co., Ltd., G41MT-S2PT
Antivirus: Windows Defender, Disabled.


i think its the ram cause i have 4 gb rams and when i take one of these off , it works fine but slow as a sloth. i know its a potato pc but its my little sister pc and she plays games you could run on your microwave. its just not normal for this to happen when running such a light-weight games.
 

Macboatmaster

Trusted Advisor
Spam Fighter
Joined
Jan 14, 2010
Messages
24,427
Well if you had have included such vital information
think its the ram cause i have 4 gb rams and when i take one of these off , it works fine but slow as a sloth
on your opening post that would have placed an entirely different light on the situation

In that case run Memtest on the ram sticks

However the CPU is 2010
https://ark.intel.com/content/www/u...ssor-e5700-2m-cache-3-00-ghz-800-mhz-fsb.html

and the chipset Intel G41 is not supported on 10 and as you can see is using WDDM 1.1
The last driver for that was issued 2013

The whole setup whilst it MAY work will never work as it should on 10 and especially so on the latest version of 10, which I doubt was offered on windows updates and if that is correct it should not have been installed

However to return to the actual problem, as I said if you have 4 x 1GB sticks and taking one out seems to make it OK then change the one you take out
to eliminate a bad stick
Then change slots to eliminate a bad slot
Memtest
https://www.memtest86.com/

please post with questions on memtest if necessary
RUN two complete passes
each pass consists of 10-12 tests
the GUI of memtest when it is running will show you test % for each test and pass percentage
So you run until it has completed the 10 or 11 tests and pass is 100%
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Staff online

Top