RapidCom faxing program

[Gasper]

Can anyone help me?
I have a faxing program called RapidCom on my US Robotics 56k voice fax modem, and I can't get it to stop dialing 1 before the number. I've tried to change it at the setup and preferences boxes but to no avail.
Yours truly frustrated
Gasper
gasper@mnsi.net

 

[eddie5659]

Hiya

It seems that most people cannot find an answer:

http://groups.google.com/groups?hl=en&th=cd40a8aa8837d677&rnum=6

Which version do you have, and do you know your Product code for your modem? From what I have gathered, its on the bottom of the modem, as a serial number.

I bet you're Win98. Apparently, it works well for 95

BTW, any one knows why under win98 3com/USR's RapidComm (smith Moicro) program
does not work. Looks like it always dials a "1" before any number entered
which basically gives me a voice reply from the phone company telling me that I
should not dial 1 for local calls.

All the settings are correctly configured and I use Microsoft fax to test that
the modem actually works, therefore it points to Rapidcomm is the culprit.

The Rapidcomm program was working fine under win95.

http://groups.google.com/groups?q=Rapidcomm+dials+"1"&hl=en&rnum=5&selm=364F00A0.C919347E@magi.com

Ah, try this:

try unchecking the "use *country* code"
(that's the "one") option, if it exists in your program, and
entering the one manually in the area code field as actually
required. This works in RapidComm, at least. A third variation
would be to set up a second "calling location" with a "one"
dialing prefix and selecting it as required. Fool around--
there's bound to be a way

http://groups.google.com/groups?hl=en&th=5956e7862d6b9491&rnum=8

Well, there's a bit to read, but maybe someone else has an answer.

Regards

eddie