1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

reset winsock and got online, but have to do it every time!

Discussion in 'Networking' started by pcvic, Jan 3, 2013.

Thread Status:
Not open for further replies.
  1. pcvic

    pcvic Thread Starter

    Joined:
    Jan 3, 2013
    Messages:
    1
    Fix from year-old thread (below) got me back online--thanks a million, Tech Support Guy!--but when I shut down and start back up have to do the same again. How to make this stick? Also, why me? Trouble started with mid-December Windows 7 and free AVG updates. Yours, pcvic

    -----------------------------

    Click Start > Run > type CMD

    Click OK.

    In the Command Prompt, type in the bold text, one command after the other, pressing Enter between each one of them:

    Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

    Reset TCP/IP stack to installation defaults: netsh int ip reset reset.log

    Reboot the computer.
     
  2. etaf

    etaf Moderator

    Joined:
    Oct 2, 2003
    Messages:
    65,252
    First Name:
    Wayne
    it may be worth removing AVG and see if that is causing an issue

    also the tcp/ip reset as below - run all three commands

    ------------------------------------------------------------------------

    TCP/IP stack repair options for use with Vista/Windows 7

    Start> Programs> Accessories> and right click on Command Prompt, select "Run as Administrator" to open a command prompt box
    (A new dialogue box - black with white font, will appear on the screen ):

    In the command prompt window that opens, type the following commands:

    Note: Type only the text in bold and red for the following commands.

    Reset WINSOCK entries to installation defaults: netsh winsock reset catalog and press enter

    Reset IPv4 TCP/IP stack to installation defaults. netsh int ipv4 reset reset.log and press enter

    Reset IPv6 TCP/IP stack to installation defaults. netsh int ipv6 reset reset.log and press enter

    ReStart (reboot) the machine.

    If you receive the message
    The requested operation requires elevation.
    Then please open the command prompt as administrator - as requested above
    Start> Programs> Accessories> and right click on Command Prompt, select "Run as Administrator" to open a command prompt box
    (A new dialogue box - black with white font, will appear on screen ):

    Please note and post back - if you receive the following message :-
    Access is Denied

    please post back the results in a reply here - its important we know that these commands have worked correctly and not produced any errors
    right click in the command prompt box
    select all
    enter
    control key + C key - to copy
    then reply here and
    control key + V to paste

    Details also here
    http://support.microsoft.com/kb/299357


    ------------------------------------------------------------------------

    AVG Removal Tools
    http://www.avg.com/gb-en/utilities
    http://www.avg.com/ww-en/utilities

    > removal tool, that can be used with AVG 2013 http://www.avg.com/tools#tba2 - > on Installation Tab > use the AvgRemover
    > removal tool, that can be used with AVG 2012 http://www.avg.com/tools2012.tpl-mcr1#tba2 -> on Installation Tab > use the AvgRemover
    > removal tool, that can be used with AVG 2011 http://www.avg.com/tools2011.tpl-mcr1#tba2 -> on Installation Tab > use the AvgRemover
    > removal tool, that can be used with AVG 9.0 http://www.avg.com/tools9.tpl-mcr1#tba2 -> on Installation Tab > use the AvgRemover
    > removal tool, that can be used with AVG 8.5 http://www.avg.com/tools8.tpl-mcr1#tba2 -> on Installation Tab > use the AvgRemover
     
As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/1083680

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice