Sempron3100 OC - yes i have read OC sticky XD

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

satanicguardian

Thread Starter
Joined
Aug 20, 2007
Messages
396
Hey guys just OC'd my sempron 3100 to 2.25ghz up from 1.8ghz, is it safe to go higher?

this is what i based my overclock on

CPU freq = 250MHz
CPU multi = 9x
HTT multi = 4x
RAM freq = 166MHz (DDR333)
PCI-E = 100MHz
PCI = 33MHz
Spread Spectrum = disabled
Cool'n Quiet = disabled
RAM voltage = add 0.10v to default voltage
CPU voltage = oncrease as necessary to stabilize

CPU at 2.25GHz with RAM at 208MHz. HTT bus at 1000MHz
 

satanicguardian

Thread Starter
Joined
Aug 20, 2007
Messages
396
also if its possible to go higher, what should i scale the values up to?

and also as far as a ram upgrade, im half asleep what am i looking for - DDR-400 SDRAM PC2700?
 

satanicguardian

Thread Starter
Joined
Aug 20, 2007
Messages
396
ok guys the above overclock is stable, i just however, inserted an older pci e graphics card compatible with system, it recognises it fine and works, however when my pc logs on after boot my keyboard and mouse (USB) don't work at all, not recognised it seems, at first i thought it was power, or the lack of it, so i replaced the stock 300watt with an OCZ 750watt psu and tried again, still the same, any idea why my usb devices arent active?
 

satanicguardian

Thread Starter
Joined
Aug 20, 2007
Messages
396
its doing its windows updates atm, 95 to go XD i will get them up later, i thrashed it for almost 10 hours on prime 95 blend test whilst i slept earlier, and was still running fine when i got up and only at 35C with a stock heatsink
 

satanicguardian

Thread Starter
Joined
Aug 20, 2007
Messages
396
I managed to get it up to 2.4ghz btw, thats what i tested it for 10 hours with and it was stable
 

satanicguardian

Thread Starter
Joined
Aug 20, 2007
Messages
396
[Mon Jan 03 01:38:16 2011]
Compare your results to other computers at http://www.mersenne.org/report_benchmarks
AMD Sempron(tm) Processor 3100+
CPU speed: 2340.21 MHz
CPU features: RDTSC, CMOV, Prefetch, 3DNow!, MMX, SSE, SSE2
L1 cache size: 64 KB
L2 cache size: 256 KB
L1 cache line size: 64 bytes
L2 cache line size: 64 bytes
L1 TLBS: 32
L2 TLBS: 512
Prime95 32-bit version 25.11, RdtscTiming=1
 

satanicguardian

Thread Starter
Joined
Aug 20, 2007
Messages
396
XD i dont have any but it did, what reason is there to doubt me :eek: its hardly an amazing feat
 
Joined
Apr 2, 2002
Messages
3,482
The Code Of The Overclockers states that all boasts must be backed up with screenshots.

:)

Sorry, I didn't make the rules.
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Members online

Top