Separate Network Print Server

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

SPSU_Guy

Thread Starter
Joined
Sep 10, 2004
Messages
2
Okay,

Here we go...

I want to set up a print server that prints to separate networks. One network is a Linux/Solaris LAN that is not connected to the internet and A Microsoft Network running either Win2000 or Windows XP Pro that is connected to the internet... it is currently running 2000 but will upgrade to XP pro. These two separate Lans will need to access this print server to access the HP LaserJet 4100 printer. So far this is what I want to do... I have an Tangent computer (Pentium 2 400 mhz 64mb ram with kingston network card) I will be adding a Office Link 3CSOHO100-TX Fast ethernet card. I will be assigning each ethenet card (considering it is possible) separate ip address. One from the ms network and one from the unix network. How do I enable these two separate networks that must not be connected print to the networked printer... or should I just share the printer onto the computer that serves as the print server..... ( I also have a linksys print server device) also do I need Nat Software... because of the 2 ethernet cards....
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Members online

Top