1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

smell from space heater

Discussion in 'Do It Yourself (Not Computer-Related)' started by ynskalad, Feb 22, 2010.

Thread Status:
Not open for further replies.
  1. ynskalad

    ynskalad Thread Starter

    Feb 22, 2010
    Hi everyone. I hope you will be able to help me with my new Eurohobby 15 space heater. I bought it about 2weeks ago brand new and connected it to butane gas bottle first. There wasn't enough gas going to the heater, so I changed it to propane (11kg bottle). I used the original regulator which came with the heater.

    It looked ok, but there was a little bit of stink like from the car exhaust. I thought because it was new, it needed running for a while and everything should be fine. After approx 10 hours running it's even worst. It smells terribly, but there's no visible smoke. The flame is mixed - blue with the normal colour of flame. It smells, like it's not burning properly. Please advise. Many thanks
  2. Sponsor

  3. JohnWill

    JohnWill Retired Moderator

    Oct 19, 2002
    I would NOT use this in enclosed spaces!

    Truthfully, I'd take it back if it's not working properly. You should have an almost invisible blue flame for this kind of heater. A small of any kind after that long a run-time is a cause for concern.
  4. Mackenziewoodwor


    Mar 2, 2010
    Going from butane to propane is not a good change without checking the burner requirements. Each ususally has it's own spec and shold not be used interchangeably which you are seeing as a mixed flame result. The fact that you felt the regulator was not delivering enough gas should be checked first.
    Please be aware the carbon monoxide poisoning is a serious issue and is a result of incomplete combution.
  5. Koot


    Nov 25, 2007
    The first question I have is - What type of gas is the heater designed to use? The second question I have is - Are you using the correct type of gas for the heater's regulator and orifice?

    You may have a regulator dedicated for use with one type of gas, but are trying to use it with a different type. Regardless of what type of gas the heater is designed to use, if you change the type of gas the heater is designed to use you most likely must change both the regulator and the orifice to properly regulate and deliver the gas being used. For what it's worth butane gas produces about 12% more energy than propane gas.

    Be careful............
  6. telecom69

    telecom69 Gone but never forgotten

    Oct 12, 2001
    For what its worth,over here in the UK these heaters run on Propane gas ...I would have thought that any running in smells should have gone after 10 hours running ...any chance you could try a different regulator or take the one back for testing that you are using ? you really should be careful with this sort of stuff (gas) there should no real noticeable smell by now and the flame should only be blue ....anything else you have incomplete combustion,hence the smell .....
  7. Sponsor

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/904944