Solved: CPU Too Hot?

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

mclarenvj

Thread Starter
Joined
May 31, 2007
Messages
652
Hi, My CPU's Normal opperating temperature according to the bios, is 71 celcius.
my proccessor is
Intel Pentium D 935 3.2Ghz
i just built a new Pc with it.

When the proccesor is underload it only rises up to 75 celsius, after i reboot and check the bios.

The rest of my PC is
Intel D945GCL Essential Series Motherboard
Jeantech Phong II ATX Case
HP DVD 940i Lightscribe Drive
BT Voyager 1040 PCI
WinTV PVR 150 MCE
Colours 650W PSU
Hitatchi 250GB HDD
Some Old philips DVD+/-RW Drive
 
Joined
Mar 16, 2002
Messages
13,404
mclarenvj said:
Hi, My CPU's Normal opperating temperature according to the bios, is 71 celcius.
my proccessor is
Intel Pentium D 935 3.2Ghz
i just built a new Pc with it.

When the proccesor is underload it only rises up to 75 celsius, after i reboot and check the bios.

The rest of my PC is
Intel D945GCL Essential Series Motherboard
Jeantech Phong II ATX Case
HP DVD 940i Lightscribe Drive
BT Voyager 1040 PCI
WinTV PVR 150 MCE
Colours 650W PSU
Hitatchi 250GB HDD
Some Old philips DVD+/-RW Drive
hsf probably not on solidly, did you use theraml grease? did cpu come with pad?
 

mclarenvj

Thread Starter
Joined
May 31, 2007
Messages
652
yh first time i put the proccesor in to test, it came out with all of that on, so i scraped it off(i didnt kno waht it was) but there is still some on the HSF
 
Joined
Mar 16, 2002
Messages
13,404
yeah you need that stuff, well I would go buy some Artic Silver 5 heat paste or similar, throughly clean the bottom of the heatsink & cpu with 90% alcohol and cotton balls, both surfaces have to be clean, then apply thermal paste small amount, size of a BB, and smooth out with a credit card until a very thin layer covers the cpu, thickness of a sheet of paper or less, then reinstall the hsf
 
Joined
Mar 16, 2002
Messages
13,404
why the heck intel went with this crazy set up I dont know, the socket and pin idea was just so much easier. You dont see this kind of thing with AMD socket 757/939/AM2

so now youre looking for pin damage on the MB instead of the cpu whoopdido, cpu is a hell of a lot easier to fix/replace IMO
 
Joined
Jul 19, 2005
Messages
11,670
brite750 said:
You dont see this kind of thing with AMD socket 757/939/AM2
But you do see it in the 2nd generation Opteron, socket F (1207) processors and you will see it a lot more as AMD gets further into 65nm and 45nm architecture.
 
Joined
Mar 16, 2002
Messages
13,404
win2kpro said:
But you do see it in the 2nd generation Opteron, socket F (1207) processors and you will see it a lot more as AMD gets further into 65nm and 45nm architecture.
I no like, seems needlessly complicated, Ive done a few now and I'm still not impressed, especially the hsf
 
Joined
Jul 19, 2005
Messages
11,670
In a case with good thermal design a PD 935 should idle around 42c. The thermal spec for the PD is 63.4c ThermalTrip should occur at approximately 78-79c


EDIT: Correct spelling
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Members online

Top