Solved: Motherboard msi k9n neo problem

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Guruman

Thread Starter
Joined
Aug 18, 2007
Messages
144
ok here is the problem i have. On a frend computer something fried up but i dont now what is it
it.s
Motherboard or Processors
so i want y to help me to solve this thing so here is what hapens
when i plug in power cable to powersupply motherboard led turns on then after a second it shut.s off pressing the power button on the case isnt helping motherboard doesent wanna start then after few tries procesor cooler start spining but nothing else hapens no beep sound for fauly ram no beep for graphic card and the system doesent even try to boot or sumting

i tried near everything i could think of
ram graphic card power supply cmos batery cmos jumpers ...

and + holding power button to turn of pc doesent work
last thing that hapend today before i sent the board to manufacturer couse i had it under waranty i left cpu cooler spining for about a half a hour when i turned off the pc i took out the procesor cooler and touched the procesor hi was cold as ice so no heating nothing


to add this computer yestrday and past several months worked wery well without any kind of problems cpu temp was 24 to 34 degrees maximum


just if someone can try to translate what i wrote now and give me the 100% answer hehe
couse i am stuck
is it procesor or it.s motherboard that got fried

thanks hope someone aswers bb
 

Triple6

Rob
Moderator
Joined
Dec 26, 2002
Messages
52,933
No one's going to be able to give you an answer with 100% certainty. Chances are high its the motherboard, if you sent the board back you shoudl find out soon enough if thats what it was.
 

crjdriver

Moderator
Joined
Jan 2, 2001
Messages
42,349
If you have already swapped in known good pw supply, ram, video card, etc; then I would put my money on the board. CPUs are actually pretty hard to hurt unless you overclock/overvolt them.
 

Guruman

Thread Starter
Joined
Aug 18, 2007
Messages
144
i got new board and system works ;) so board was the problem as i had suspected
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Staff online

Top