Solved: Nero

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Snowblinde

Thread Starter
Joined
Mar 20, 2004
Messages
20
:confused: Hi. I'm trying to burn some photos onto a CD and Nero (or something) isn't letting me. Here is the log for the failed burn. Can anyone decipher it for me? Thanks
Snow


1502-0001-0008-0488-4424-9831

Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 05/11/1998 8:01:00 PM
Nero Version: 5.5.9.14 (Nero Express)
Recorder: <ATAPI CD-RW 52X24> Version: K.IC - HA 0 TA 1 - 5.5.9.14
Adapter driver: <ESDI_506> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ATAPI CD-RW 52X24> Version: K.IC - HA 0 TA 1 - 5.5.9.14
Adapter driver: <ESDI_506> HA 0
Bus Type : default (0) -> ATAPI, detected: ATAPI
ATAPI CD-RW 52X24 (Target 1, D:): Autoinsert On, DMA Off, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 24117248 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 159MB (163208kB)
Free physical memory: 0MB (668kB)
Memory in use : 79 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: On

26.1.2005
CD-ROM (ISO)
12:42:51 PM #1 Text 0 File Isodoc.cpp, Line 6887
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

12:42:52 PM #2 Phase 87 File dlgbrnst.cpp, Line 1571
Seamless Link activated

12:42:53 PM #3 Text 0 File Reader.cpp, Line 118
Reader running

12:42:53 PM #4 Text 0 File Writer.cpp, Line 127
Writer ATAPI CD-RW 52X24 running

12:42:53 PM #5 ISO9660GEN -11 File geniso.cpp, Line 4484
First writeable address = 0 (0x00000000)

12:42:54 PM #6 Text 0 File Burncd.cpp, Line 3588
Turn on Track-At-Once, using CD-R/RW media

12:42:54 PM #7 Text 0 File ThreadedTransferInterface.cpp, Line 660
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 168637 (168637) = #168637/37:28.37
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

12:42:56 PM #8 Text 0 File DlgWaitCD.cpp, Line 203
Last possible write address on media: 359845 (79:59.70)
Last address to be written: 168636 (37:30.36)

12:42:56 PM #9 Text 0 File DlgWaitCD.cpp, Line 208
Write in overburning mode: FALSE

12:42:56 PM #10 Text 0 File DlgWaitCD.cpp, Line 1420
Recorder: ATAPI CD-RW 52X24;
CDRW code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 90, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

12:42:56 PM #11 Text 0 File BurnCDUtil.h, Line 129
Enable auto-insert wasn't successfull for all drives.

12:42:56 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 812
Prepare recorder ATAPI CD-RW 52X24 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 345675776

12:42:56 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 840
Removed 2 run-out blocks from end of track 1.

12:42:56 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 660
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 168637 (168637) = #168637/37:28.37
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 168635 blocks [ATAPI CD-RW 52X24 ]
--------------------------------------------------------------

12:42:56 PM #15 Phase 24 File dlgbrnst.cpp, Line 1571
Caching of files started

12:42:56 PM #16 Phase 25 File dlgbrnst.cpp, Line 1571
Caching of files completed

12:42:56 PM #17 Phase 36 File dlgbrnst.cpp, Line 1571
Burn process started at 52x (7,800 KB/s)

12:42:56 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 1948
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

12:42:56 PM #19 Text 0 File Mmc.cpp, Line 17168
Set BUFE: Seamless Link -> ON , Auto Pilot : ON

12:43:35 PM #20 SCSI -1135 File Cdrdrv.cpp, Line 1381
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x021E0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x10 0xF4 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

12:43:35 PM #21 MMC -1135 File Writer.cpp, Line 335
Write error

12:43:35 PM #22 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

12:43:35 PM #23 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

12:43:36 PM #24 CDR -201 File WriterStatus.cpp, Line 188
Invalid write state

12:43:36 PM #25 TRANSFER -18 File WriterStatus.cpp, Line 188
Could not perform EndTrack

12:43:37 PM #26 SCSI -1135 File Cdrdrv.cpp, Line 1177
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

12:43:37 PM #27 MMC -1135 File WriterStatus.cpp, Line 227
Write error

12:43:37 PM #28 TRANSFER -19 File WriterStatus.cpp, Line 227
Could not perform Fixation

12:43:37 PM #29 Text 0 File WriterStatus.cpp, Line 236
falling back to disc fixation

12:43:38 PM #30 SCSI -1135 File Cdrdrv.cpp, Line 1177
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00

12:43:38 PM #31 MMC -1135 File WriterStatus.cpp, Line 227
Write error

12:43:38 PM #32 TRANSFER -19 File WriterStatus.cpp, Line 227
Could not perform Fixation

12:43:38 PM #33 Phase 38 File dlgbrnst.cpp, Line 1571
Burn process failed at 52x (7,800 KB/s)

12:43:38 PM #34 Text 0 File Scsicmd.cpp, Line 402
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 05/11/1998 8:01:00 PM
File 'IoSubsys\NEROCD95.VXD': Ver=4.5.0.14, size=39882 bytes, created 09/11/2002 6:01:04 PM
File 'IoSubsys\DRVWPPQT.VXD': Ver=3.10.36a, size=228223 bytes, created 05/11/1998 8:01:00 PM
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 05/11/1998 8:01:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.1998, size=24406 bytes, created 05/11/1998 8:01:00 PM
File '..\System\Vmm32\Ios.vxd': Ver=4.10.1998, size=69454 bytes, created 05/11/1998 8:01:00 PM
File 'IoSubsys\Disktsd.vxd': Ver=4.10.1998, size=18805 bytes, created 05/11/1998 8:01:00 PM
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.1998, size=24406 bytes, created 05/11/1998 8:01:00 PM (Adapter driver for rec)

Registry Keys:
 
Joined
Aug 17, 2003
Messages
17,584
The (KEY_MEDIUM_ERROR) 03-0c-00 suggests either a drive fault or disk media problem.

What type of media are you using. I note you are burning at maximum speed but speed sensing is turned off. Are you trying to burn faster than the media will accept?
 
Joined
Nov 9, 2004
Messages
1,556
Just want to make sure you have click on the drop down to "cd" and its still not on the DVD. My default is DVD. I've forgotten a few times and got errors. Just to make sure you check it out, I'm sure you have, but its easy to overlook, when you are looking for something else. Also, Nero has new versions out there now since there newest ones this month. Kind of a mid month updates to the main program 6.6.0.6 and the Nero Vision Express NVE Ver 3.0.1.27. Also, Don't forget you language packs and templates. Good luck.
 

Snowblinde

Thread Starter
Joined
Mar 20, 2004
Messages
20
I uninstalled and reinstalled Nero and it worked like a charm. Don't know what made me do that but I'm glad it solved the problem. Thanks everyone for your suggestions.
Snow
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Staff online

Top