1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

Solved: Wireless networking!! help me!

Discussion in 'Networking' started by leroycocu, Jul 11, 2005.

Thread Status:
Not open for further replies.
Advertisement
  1. leroycocu

    leroycocu Thread Starter

    Joined:
    Feb 3, 2004
    Messages:
    44
    I have now 2 promedion 802.11 g USB Wlan stick's.
    they are installed on both pc's.
    and i want this setup to work
    -- <wired )) <wireless
    MODEM--GATEWAY )) MY PC
    so i installed and found some info...
    the problem now is im not getting connection..
    it got a ip that doesnt seem right to me (but im new to wireless)
    169.254.244.241 MY PC
    169.254.106.15 GATEWAY
    MY PC doesnt receive packet's
    and it send's only a few
    GATEWAY has received a couple thousand packet's
    and havent sent a packet
    GATEWAY is using the ad-hoc type
    and mode is station MY PC is also station
    i hope its enough info...
    i would really like some help
    thnQ
     
  2. TerryNet

    TerryNet Moderator

    Joined:
    Mar 23, 2005
    Messages:
    76,505
    First Name:
    Terry
    I totally do not understand your setup. Are you trying to set up an ad-hoc wireless network between two computers? Or are you trying to set up an infrastructure network with a wireless router dishing out the IP addresses? If the former, the IPs indicate you may have succeeded, but we'd need more info to be sure. If you're using a router, the computers are not getting IP from it.

    In either case, make sure Windows' firewalls are disabled and 3rd party firewalls uninstalled until you get the network operating satisfactorily.
     
  3. leroycocu

    leroycocu Thread Starter

    Joined:
    Feb 3, 2004
    Messages:
    44
    well i got a GATEWAY computer, it share's its i-net connection.
    i got 2 wireless usb stick's
    1 is installed on mij computer and 1 is installed op the GATEWAY computer.
    there is no acces point or router....
    i want to go on the net using te wireless usb stick.
    it got them connected and they seems to react on ping.
    and ik got the i-net connection shared. and disabled the xp firewall.
    but i have a norton firewall on my computer
    but i do not get an connection for i-net.
    havent tested if i could acces any network file or folder i will try that later
    thnQ
     
  4. leroycocu

    leroycocu Thread Starter

    Joined:
    Feb 3, 2004
    Messages:
    44
    okay,
    i have checked it and it is now a fully functioning network.
    shared printer is found i have acces the shared folder..
    but im not getting internet connection from it :confused:
    btw is also route's i-net trough a wired network.
    to my pc and my brother's pc.
    but my brother is soon moving out of house.
    but still it must be possible to route it...
    every pc is running XP pro with sp2
     
  5. Malaikah

    Malaikah

    Joined:
    Jul 14, 2003
    Messages:
    22
    What you have got here is two seperate networks. One of which (the wireless one), is using the 169.254.*.* range. The other (the wired one) is presumably using the 192.168.*.* range that Windows Internet Connection Sharing generally uses. The problem is that there is no connection between the two networks. To acheive this you need to configure your Gateway machine as a router that can transfer traffic from one to the other.

    If you are running Windows 2000 or XP you should be able to do this. I haven't tried it before, but this link looks useful:

    http://www.petri.co.il/configuring_routing_in_w2k_pro_xp_pro.htm

    Hope that helps.
     
  6. leroycocu

    leroycocu Thread Starter

    Joined:
    Feb 3, 2004
    Messages:
    44
    well it does not work :confused:
    i have tried it like it said the page but
    still my wireless will stilll only be a network..
    and doesnt seem to give internet :(
    it looks like my situation but it still doesnt do what i want
     
  7. leroycocu

    leroycocu Thread Starter

    Joined:
    Feb 3, 2004
    Messages:
    44
    well....im just giving it up...kind of ;)
    i used VNC server to controll the gateway and check setting's etc.
    and then i screwed it up and i lost internet connection in my pc.
    went down and changed some setting's...so i would have a connection again.
    so i set up again to share internet but then i saw i could select a connection to wich one it would share it...so i chose wireless..and it work's...
    well tomorow im gonna buy another usb stick for my brother :p
    and he may go wireless 2 :rolleyes: as long he still is here
    (so he wont get mad at me)

    conclusion seems that i can share 1 internet connection to 2 network's
    solution merge them :cool:
    But
    Thank's anyway
    it would have been a great challenge if it would gotten to work.
    THANK YOU
     
  8. Sponsor

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/379902

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice