1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

Solved: wireless router connection problems

Discussion in 'Networking' started by wishll3ss, Feb 20, 2013.

Thread Status:
Not open for further replies.
Advertisement
  1. wishll3ss

    wishll3ss Thread Starter

    Joined:
    Feb 12, 2013
    Messages:
    2
    hi everyone. can anyone help me with my problem? i have a d-link DIR-600 wireless router connected to another router (which is the main line by the way). i always experience disconnection every morning. i tried resetting the router to its factory settings and i am back online. this has been going on for 3 days already. the router is used by the school, and we have at least 20 PCs connected to it, wireless and wired. i am from the Philippines and we have a DSL internet connection.
     
  2. etaf

    etaf Wayne Moderator

    Joined:
    Oct 2, 2003
    Messages:
    63,310
    need to establish exactly what is disconnecting
    is it just the d-link DIR-600 that is disconnecting or does the main router disconnect

    If just the d-link DIR-600 is it both cable and wireless or just the wireless

    assuming as your post implied , its just the d-link DIR-600 wireless
    would you do the following from a PC
    would you post the following tests when the internet is working OK, and then repeat ALL the tests when the internet disconnects.
    Make sure you also indicate on the reply which tests are for what condition.
    please include the xirrus screen shots for both conditions - see how below.

    ------------------------------------------------------------------------
    ipconfig /all
    If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
    Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

    If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply
    Note: you will see entries named Tunnel adapter Teredo Tunneling Pseudo-Interface: we dont need to see that information - JUST the infomation above those entries

    We would like to see the results from an ipconfig /all - post back the results in a reply here.

    For Windows 8
    to open a Cmd Prompt or an Administrator Cmd prompt from the Desktop. Use Win + X and choose Command Prompt or Command Prompt (Admin) from the list.

    This should work for all windows version, XP, Vista, W7
    Hold the Windows key and press R

    then type CMD

    then press Enter to open a command prompt box
    (A new dialogue box - black with white font, will appear on screen ):

    In the command prompt window that opens, type the following command:

    Note that there is a space before the /ALL, but there is NOT a space after the / in the following command.

    ipconfig /all > network.txt & network.txt

    It will export the results into notepad and then automatically open the notepad and display on your screen.

    Now all you need to do is copy and paste those results into a reply here
    to do that:
    From the notepad menu - choose Edit - Select all
    all the text will now be highlighted
    Next
    From the notepad menu - choose Edit - Copy

    Now go back to the forum - goto the reply and then right click in the reply box and paste the results.
    The results from the notepad should now appear in the forum reply.
    ------------------------------------------------------------------------

    ------------------------------------------------------------------------
    Ping Tests
    If you cannot access the internet with this PC, then you will need to paste the results into something like notepad and then copy onto a machine that can access the internet and post the results in a reply here.
    Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

    If you do not have another PC - do you have a phone connected to the internet - can you photograph the result and post the image in a reply

    For Windows 8
    to open a Cmd Prompt or an Administrator Cmd prompt from the Desktop. Use Win + X and choose Command Prompt or Command Prompt (Admin) from the list.

    This should work for all windows version, XP, Vista, W7
    Hold the Windows key and press R

    then type CMD

    then press Enter to open a command prompt box
    (A new dialogue box - black with white font, will appear on screen ):

    In the command prompt window that opens
    ns

    Type the following command
    Ping {then a space and then add the number that is shown against the item labelled "default gateway" shown in the results from the ipconfig /all}
    Post back the results in a reply here
    right click in the command prompt box
    select all
    enter
    control key + C key - to copy
    then reply here and
    control key + V to paste

    Type the following command
    Ping google.com
    Post back the results in a reply here
    right click in the command prompt box
    select all
    enter
    control key + C key - to copy
    then reply here and
    control key + V to paste

    Type the following command
    Ping 209.183.226.152
    Post back the results in a reply here
    right click in the command prompt box
    select all
    enter
    control key + C key - to copy
    then reply here and
    control key + V to paste

    ------------------------------------------------------------------------

    ------------------------------------------------------------------------
    Run Xirrus Wi-Fi Inspector
    Download and install

    If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
    Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and install the program.
    You will now need to take a screen shot and copy that back to the working PC and attach the screen shot in a reply on the forum here.

    http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
    Direct link to the program is here http://info.xirrus.com/Wi-FiInspectorConfirmation.html

    {If the above link does not work heres another link http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html}

    Then run and install the program - on a wireless enabled PC/Laptop
    if you get an error - You need will need to have NET Framework installed for the WiFi Inspector to function.
    On windows 8 - (i do not have windows 8) but, it would appear that, When you first try to run, you may get a message that .net framework is needed, and included in that message is a link to download/install.

    Run the program

    A user guide is available here http://www.xirrus.com/cdn/pdf/Xirrus-Wi-Fi-inspectorguide-1-2-1-RevB-6.aspx

    post a screen shot of the program running.
    if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information.

    post which SSID name is yours, its located in the list, under network "Adapter Name" (1st column)


    Note:
    For a reliable (or robust as the Xirrus user guide says) wireless connection you need a signal of about -70 dBm or better. "A desirable signal level for a robust Wi-Fi connection will be green".
    note: the signal level is a negative number, so for example -88 is worst and -40 is better

    To post a screen shot of the active window.
    Windows XP
    Hold the Alt key and press the PrtScn key. Open the Windows PAINT application (Start> All Programs> Accessories> Paint) and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.

    Vista or Windows 7
    you can use the "snipping tool" which is found in Start> All programs> Accessories> Snipping Tool

    Windows 8
    you can use the snipping tool > Open Snipping Tool (From the Windows 8 Start Screen, type "snip" and press enter.
    >Press the Esc. key.
    >go back to your Windows 8 start screen - Swipe from left or press Window Button
    >Press Ctrl+PrntScr button to use Snipping Tool
    see here
    http://www.pcadvisor.co.uk/opinion/windows/3415854/how-take-screenshot-in-windows-8/
    http://www.pcadvisor.co.uk/how-to/windows/3405830/how-take-screenshot-in-windows-8/


    To upload the screen shot to the forum, open the full reply window ("Go Advanced" button) and use the Manage Attachments button to upload it here.
    Full details are available here http://library.techguy.org/wiki/TSG_Posting_a_Screenshot

    A useful guide on troubleshooting an intermittent wireless connection
    http://help.orange.co.uk/orangeuk/support/personal/353093
     
  3. wishll3ss

    wishll3ss Thread Starter

    Joined:
    Feb 12, 2013
    Messages:
    2
    thanks for the info. but the people in the higher position has another idea. they just reset the dir 600 router and changed the password, and it is back online again. but i will save the information that you posted here just in case of another router breakdown.
     
  4. etaf

    etaf Wayne Moderator

    Joined:
    Oct 2, 2003
    Messages:
    63,310
    thanks for letting us know (y)
     
As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/1090405