System Crashing!!!!!

Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

oxygenan

Thread Starter
Joined
Nov 18, 2006
Messages
61
Pc keeps shutting down randomly but it does not go the the normal shut down procedure, instead it just crashes like someone switches off the power or something.

sometimes aftter 10 min of booting sometimes 2 hrs later

I get the Error report dialog the next time i reboot after the crash

BCCode : 10000050 BCP1 : E16A1000 BCP2 : 00000000 BCP3 : 804FAFF5
BCP4 : 00000001 OSVer : 5_1_2600 SP : 2_0 Product : 256_1

Data report etc....

C:\DOCUME~1\Mn\LOCALS~1\Temp\WER2386.dir00\Mini020407-01.dmp
C:\DOCUME~1\Mn\LOCALS~1\Temp\WER2386.dir00\sysdata.xml

What could be the problem and whats the solution??
 

oxygenan

Thread Starter
Joined
Nov 18, 2006
Messages
61
I changed the setting...

System Properties - Advanced - Startup and Recovery Settings and unchecked "Automatically Restart".

The next time i got the same problem a blue screen appeared and its contents are::


A problem has been detected and windows has been shut

down to prevent damage to your computer.
Page_fault_in_nonpaged_area
If this is the first time you'veseen this stop error

screen restart your computer. If this screen appers

again, follow these steps:
Check to make sure any new hardware or software is

properly installed. If this is a new installation ask

your hardware or software manufacturer for any windows

updates you might need. If problems continue, disable or

remove any newly installed hardware or software. Disable

BIOS memory options such as caching or shadowing. If you

need to use safe mode to remove or disable components,

restart your computer, press F8 to select advanced start

up options, and then select safe mode.
Technical information:
***STOP:0x00000050(xE2BDC000, 0X00000000, 0X804FAFF5,

0X00000001)

Begining dump of physical memory physical memory dump

complete.
Contact your system administrator or technical support

group for further assistence.
 

oxygenan

Thread Starter
Joined
Nov 18, 2006
Messages
61
Another time i got the following msg...





A problem has been detected and windows has been shut down to prevent damage to your computer.
The problem seems to be caused by the following file: WINCOM32.sys
Driver_unloaded_without_cancelling_pending_operations

If this is the first time you'veseen this stop error screen restart your computer. If this screen appers again, follow these steps:
Check to make sure any new hardware or software is properly installed. If this is a new installation ask your hardware or software manufacturer for any windows updates you might need. If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced start up options, and then select safe mode.
Technical information:
***STOP:0x000000CE (0xF2964576, 0X00000000, 0XF2964576, 0X00000000)
Wincom32.sys

Begining dump of physical memory physical memory dump complete.
Contact your system administrator or technical support group for further assistence.
 
Status
This thread has been Locked and is not open to further replies. Please start a New Thread if you're having a similar issue. View our Welcome Guide to learn how to use this site.

Users Who Are Viewing This Thread (Users: 0, Guests: 1)

As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 807,865 other people just like you!

Latest posts

Staff online

Top