senior geek
Thread Starter
- Joined
- Jan 17, 2007
- Messages
- 10
I am confused about a strange issue that I am trining to resolve, the system volume name says it is C,/C:/ instead of C:/. I suspect the problem started when I added an additional hard drive and I forgot to change the drive to slave from the master configuration. Windows xp sp2 home is installed on a SATA drive and the additional drive is an IDE drive.
I did notice after installing the second drive windows was calling this drive as the system volume drive even though windows was installed and boots to the SATA drive. I have disconnected the second drive but the system volume name C./C:/ did not change.
Does anyone know if I can just rename the drive to C:/ or is it a better idea to do a windows repair to resolve the issue. .
Thanks in advance
Senior Geek
I did notice after installing the second drive windows was calling this drive as the system volume drive even though windows was installed and boots to the SATA drive. I have disconnected the second drive but the system volume name C./C:/ did not change.
Does anyone know if I can just rename the drive to C:/ or is it a better idea to do a windows repair to resolve the issue. .
Thanks in advance
Senior Geek