1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

Wifi Catcher Issues

Discussion in 'Networking' started by nyjets861, Dec 16, 2011.

Thread Status:
Not open for further replies.
  1. nyjets861

    nyjets861 Thread Starter

    Joined:
    Dec 16, 2011
    Messages:
    1
    My wifi catcher is not working properly. It will work for a few minutes after I start my computer, but then will turn off. It will then not enable either manually on the side or in network connections. I have tried upgrading the driver, doing a system restore, and uninstalling both software and hardware and reinstalling it. It still does the same exact thing.
     
  2. etaf

    etaf Moderator

    Joined:
    Oct 2, 2003
    Messages:
    65,421
    First Name:
    Wayne
    sounds like a hardware issue - lets see a xirrus screen shot and a device manager screen shot


    ------------------------------------------------------------------------
    Run Xirrus Wi-Fi Inspector
    Download and install

    If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
    Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.


    http://www.xirrus.com/Products/Wi-Fi-Inspector.aspx
    Direct link to the program is here http://wpc.475a.edgecastcdn.net/00475A/XirrusWiFiInspectorSetup.1.2.0.exe

    {If the above link does not work heres another link http://www.pcworld.com/downloads/file_download/fid,77196-order,4/download.html}

    Then run and install the program - on a wireless enabled PC/Laptop
    if you get an error - You need NET Framework installed for the WiFi Inspector to function.

    Run the program

    A user guide is available here http://www.xirrus.com/Products/Wi-Fi-Inspector/xirruswifiinspectorguide1-2-0.aspx

    post a screen shot of the program running - if there are a lot of networks showing can you click on "networks" top lefthand area - so we can see all the network information, and also post which network "Adapter Name" (1st column) is yours on the list

    To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
    To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here.
    Full details are here http://library.techguy.org/wiki/TSG_Posting_a_Screenshot

    Note:
    For a reliable (or robust as the Xirrus user guide says) wireless connection you need a signal of about -70 dBm or better.

    If you are using the Mac OS then use http://www.istumbler.net/
    ------------------------------------------------------------------------

    ------------------------------------------------------------------------
    Device Manager
    Post back the results in device manager
    If you cannot access the internet with this PC, then you will need to copy the program across to the faulty PC
    Save the file to a USB flash drive or other removable media. Plug it into the working computer with internet access and copy the file and paste here.

    windows key and pause Key should open to allow device manager to be seen on laptops may need to use windows key + FN key + Pause Key
    if not then

    Start > control Panel {Vista set to classic view}> system > {Vista, device manager on left hand side} {XP hardware Tab, device manager button} >
    windows 7
    start > control panel> System and Security> Device Manager

    network adaptors, click on the + > post back the devices listed there
    are there any ! ? or X


    post a screen shot of the device manager - network adapters

    To post a screen shot of the active window, hold the Alt key and press the PrtScn key. Open the Windows PAINT application and Paste the screen shot. You can then use PAINT to trim to suit, and save it as a JPG format file.
    To upload it to the forum, open the full reply window and use the Manage Attachments button to upload it here
    Full details are here http://library.techguy.org/wiki/TSG_Posting_a_Screenshot
    ------------------------------------------------------------------------
     
As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/1031564

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice