1. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members.

Win XP won´t detect video card, network adapter, or monitor. Help.

Discussion in 'Hardware' started by pacorod, Nov 15, 2006.

Thread Status:
Not open for further replies.
  1. pacorod

    pacorod Thread Starter

    Joined:
    Nov 14, 2006
    Messages:
    6
    My computer doesn't detect my video card (ATI radeon x800 xt), my monitor (dell m993c), or my network adapter. My system recently crashed, because one of the drives in the RAID 1 array failed. I had to do a repair installation of Win XP. Now that I have an OS up, I found many software and device malfunctions.

    I found the following hardware conflicts in my system information:

    IRQ 4 Intel(R) 925X/XE PCI Express Root Port - 2585
    IRQ 4 Intel(R) 537EP V9x DF PCI Modem #2
    IRQ 4 Communications Port (COM1)

    I/O Port 0x000003C0-0x000003DF VgaSave
    I/O Port 0x000003C0-0x000003DF Intel(R) 925X/XE PCI Express Root Port - 2585

    Memory Address 0xFEDA0000-0xFEDFFFFF PCI bus
    Memory Address 0xFEDA0000-0xFEDFFFFF Motherboard resources

    IRQ 8 Creative SB Audigy 2 ZS (WDM)
    IRQ 8 System CMOS/real time clock

    Memory Address 0xA0000-0xBFFFF VgaSave
    Memory Address 0xA0000-0xBFFFF Intel(R) 925X/XE PCI Express Root Port - 2585

    I/O Port 0x000003B0-0x000003BB VgaSave
    I/O Port 0x000003B0-0x000003BB Intel(R) 925X/XE PCI Express Root Port - 2585

    IRQ 116 Intel(R) 82801FB/FBM USB Universal Host Controller - 2658
    IRQ 116 Intel(R) 82801FB/FBM USB2 Enhanced Host Controller - 265C


    Under problem devices in system information, I get the following:

    Intel(R) 82801FB/FBM PCI Express Root Port - 2660
    PNP Device ID: PCI\VEN_8086&DEV_2660&SUBSYS_00000000&REV_03\2&EBB567F&0&E0
    Error code: 35

    Intel(R) 82801FB/FBM PCI Express Root Port - 2662
    PNP Device ID: PCI\VEN_8086&DEV_2662&SUBSYS_00000000&REV_03\2&EBB567F&0&E1
    Error Code: 35

    Intel(R) 925X/XE PCI Express Root Port - 2585
    PNP Device ID: PCI\VEN_8086&DEV_2585&SUBSYS_00000000&REV_04\2&EBB567F&0&08
    Error Code: 35


    I tried removing the video card from its slot in the motherboard and reinserting it, but that didn't work. All of these devices were in the exact same slots as before. So, I think it's an OS problem.

    How do I get my computer to recognize these devices? Help please.
     
  2. schusterjo

    schusterjo

    Joined:
    Nov 11, 2006
    Messages:
    1,182
    You should be able to just rebuild the array by replacing or formating the drive that crashed. Look in the manual on how to rebuild the array
     
  3. pacorod

    pacorod Thread Starter

    Joined:
    Nov 14, 2006
    Messages:
    6
    Thanks for replying. The array has been rebuilt. The issue is some of the devices aren't recognized by the operating system. The computer doesn't detect the video card, the network adapter, or the monitor. The devices are located in the exact same slots as when they came installed from Dell. I need to resolve this issue. Please advice.
     
As Seen On
As Seen On...

Welcome to Tech Support Guy!

Are you looking for the solution to your computer problem? Join our site today to ask your question. This site is completely free -- paid for by advertisers and donations.

If you're not already familiar with forums, watch our Welcome Guide to get started.

Join over 733,556 other people just like you!

Loading...
Thread Status:
Not open for further replies.

Short URL to this thread: https://techguy.org/518539

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice