Solved WLAN Extensibility Module has failed to start

[NobbyT]

Hi all

Really hoping you can help with my problem, after about 30-40mins my PC lags and reboots (Blue screen)

Looking in the Event Viewer i'm getting this…

WLAN Extensibility Module has failed to start

Module Path: C:\Windows\system32\Rtlihvs.dll

Error Code: 126

And

Intel(R) Ethernet Connection (2) I219-V

Network link is disconnected.

System

OS Windows 10 Home 64-bit

CPU Intel Core i7 7700K @ 4.80GHz

Kaby Lake 14nm Technology

RAM 16.0GB (16-16-16-39)

Motherboard ASUSTeK COMPUTER INC. MAXIMUS IX HERO (LGA1151)

Graphics NVIDIA GeForce GTX 1080 (EVGA)

Wifi NETGEAR\A6100 (No Ethernet cable)


I have carried out the following, but still getting the problem...


1 Run the Network troubleshooter followed by networking commands

2 Roll back the network adapter driver

3 Update the network adapter driver

4 Temporarily turn off firewalls

5 Uninstall the network adapter driver and restart

6 Use network reset to reinstall network devices
-------------------------------------------------------------------------------------

Just to add, i have also now tried contecting via Ethernet cable, so problem.

I have also got following, which seem to say "The interface is not connected to any network"
althought I can still contect to the internet...

Wi-Fi (SKY1809F)
SSID SKY1809F
Frequency 5180000 kHz
Channel Number 36
Name SKY1809F
Signal Strength/Quality 100
Security Enabled
State The interface is not connected to any network
Dot11 Type Infrastructure BSS network
Network Connectible
Network Flags There is a profile for this network
Cipher Algorithm to be used when joining this network AES-CCMP algorithm
Default Auth used to join this network for the first time 802.11i RSNA a


Last Updated: 30 Apr 2018

 

[DaveA]

Do you have the Windows 10 Spring 1803 update installed?

 

[NobbyT]

Hi Dave

Yes I do, updated recently, could this be the problem?

Sent from my SM-G950F using Tapatalk

 

[NobbyT]

Hi

I believe I have fixed the problem, Just before the problems started, I updated to Windows 10 Spring 1803, but also updated the following driver

Intel(R) management Engine Interface, I rolled back to an earlier driver
and after running my PC on load for 3 hours, I have had no more crashes.

So fingers cross..